Paver Joint Sand

SEK PolySweep

PolySweep delivers superior strength and long-term durability, not gimmicky claims and false promises. PolySweep’s time-tested, original formula provides reliable, haze free performance and is never tricky to install. For hardscape projects that matter, PolySweep is the only choice that delivers solid performance and value.

SEK Paver Joint Sand C144

An important part of the paver installation process is the installation of the proper jointing sand. SEK-Surebond Paver Jointing Sand will properly complete the interlocking of the segmental pavers because it is clean, angular and meets ASTM-C144 specifications. This type of sand is more stable in the paver joints and has the optimal gradation to ensure long term performance of the pavement system. SEK-Surebond Paver Jointing Sand is ideal for use with SEK-Surebond Joint Stabilizing Sealers.

Features

  • Angular Jointing Sand Meets ASTM-C144 Standards
  • Recommended for Joints Up to 3/4″
  • Washed, Screened & Dried

Gator MAXX G2 Sand

GATOR MAXX G2 is made with a state-of-the-art manufacturing process. Specifically, calibrated sand is mixed with sophisticated intelligent polymers. This new generation of Intelligent Polymers neutralizes haze and dust. The polymeric sand application is now dust free and haze free. No blower is needed and the intelligent polymeric sand requires only one watering. GATOR MAXX G2 is recommended for a variety of uses including pool decks, patios, footpaths, driveways, parking spaces, pavements, etc. Ideal for concrete pavers, natural stones, wetcast products and clay pavers.

Features

  • Can be used for joints up to a maximum of 4″ (10 cm) in traditional application and 2″ (5 cm) in overlay application
  • For traditional, overlay, residential and commercial applications
  • ASTM C144 gradation allows use in even the tightest joints
  • OSHA cristalline silica compliant (OSHA 29 CFR 1926.1153)
  • No Dust, Haze Free, No Blower, and one watering
  • For traditional application, Rapid Set rain safe 15 minutes after water activation.
  • For overlays, rain safe 24 hours after water activation.
  • Works above 32°F (0°C)
  • Faster insallation time
  • Ideal for Gator Base applications
  • Can be used on false joint pavers
  • Waterproof bags. Lay bag flat on its back, so front of the bag is facing you. Intact pallets or bags can be stored outdoors.

Gator Nitro Joint Sand

Gator Nitro Joint Sand is a ready-to-use mixture of calibrated sand and resins which cure when exposed to air, hardening from top to bottom of the joint *. The product can be installed in wet or dry weather, in joints ranging from a minimum 3/16” (5 mm) to a maximum 2” (50 mm) joint width. The minimum joint depth is 1” (25 mm).

Features

  • Apply in wet or dry weather
  • Strength from top to bottom *
  • Permeable **
  • * Gator Nitro Joint Sand will harden from top to bottom up to 2 3/8’’ (60 mm).
  • ** Permeable as installed. If not maintained, permeability will be obstructed over time.