Hohmann & Barnard, Inc. Dur-O-Wal®

Dur-O-Wal® was officially acquired by Hohmann & Barnard on April 23, 2010. A pioneer in the masonry reinforcement industry, Dur-O-Wal established one of the most well-known brands, widely recognized in the masonry construction and architectural communities.

Hohmann & Barnard, Inc. VS Series- PVC Control Joint

  • The PVC material conforms to ASTM D 2287 (Type PVC 654-4) with a durometer hardness of 85 (+ or – 5) when tested in conformance with ASTM D 2240
  • Length per piece is 4ft.

Hohmann & Barnard, Inc. RS Series- Rubber Control Join

  • Extruded rubber material
  • Rubber material conforms to ASTM D-2000 2AA-805 with a durometer hardness of 80 (+ or – 5) when tested in conformance with ASTM D 2240
  • Length per piece is 4ft.

Hohmann & Barnard, Inc. MFL – Metal Flashing

MFL – Metal Flashing can be formed according to job requirements.

  • State dimensions when ordering.
  • Comes standard with factory formed, hemmed drip edge.
  • Hohmann & Barnard manufactures a variety of metal flashing products and accessories to suit numerous job conditions.
  • Products include standard sheet flashings bent to custom sizes and shapes, pre-fabricated inside or outside corners, end dams, splice tape and reglets
  • There are various product styles, each of which are manufactured per the dimensional requirements of the customer

26 ga. type 304 or 316 stainless steel
16 oz. or 12 oz. copper

Lead-coated copper, terne-coated stainless steel or other gauges are available on special order
To use copper flashing with the ENVIRO-BARRIER system warranty, 16 oz. is required.

Byer Steel Rebar

From stock length bundles to the most complex deformed/fabricated rebar, Byer Steel is the region’s premier full-service concrete steel supplier.

Made exclusively at our facility, our A-996 axle grade rebar is manufactured using train axles as its only raw material source and is made from 100% recycled materials. This provides engineers and contractors with the opportunity to develop valuable LEED points, while utilizing rebar equivalent to A-615.


#4 (1/2″) #13 0.668
#5 (5/8″) #16 1.043