One part advanced polyurethane, elastomeric sealant/adhesive

Sikaflex®-11 FC is a one-component, gun-grade, adhesive and sealing compound of permanent elasticity. This dual-purpose material is based on a special moisture-cured polyurethane with an accelerated curing time that meets ASTM C920 Type S, Grade NS, Class 12.5, Use NT, I, M, A, O. and Federal Specification TT-S-00230C, Type II, Class B.

• Excellent adhesion on all cement-based materials, brick, ceramics, glass, metals, wood, epoxy, polyester and acrylic resin
• Fast cure rate
• Good weathering and water resistance

(formerly MWeld 948)

HIGH-STRENGTH, HIGH-SOLIDS POLYURETHANE ADHESIVE

SikaBond®-948 is a high-strength, high-solids, low-VOC polyurethane adhesive that is stronger than conventional adhesives. It produces a permanent overnight bond to almost any substrate. It can be used in a wide range of climates and conditions.

• Low odor and low VOC formulation is safe to use in occupied indoor spaces
• Strong and versatile adhesion that permanently bonds together nearly any material
• High solids, nonshrinking formulation provides desired coverage without cracking or losing bond over time

(formerly MWeld 620)

VERSATILE ONE COMPONENT, ELASTOMERIC ADHESIVE/SEALANT

SikaBond®-620 is a multi-purpose, elastomeric adhesive/sealant that provides excellent performance on a wide variety of substrates and applications.

• One component formulation provides enhanced application efficiency
• Withstands 25% total joint movement for use on moving joints and seams
• Bonds similar and dissimilar materials, including aluminum, glass, vinyl, ceramic, porcelain, plastics, rubber, painted metals, wood, fiberglass, and composite materials, providing job site versatility

High strength, two component adhesive anchoring system

Sika AnchorFix®-1 adhesive anchoring system has been specially formulated as a high-performance, two component adhesive anchor system for threaded and reinforcing bars in uncracked concrete.

• Fast curing
• Standard guns can be used
• Can be used at low temperatures

Super strength, two component adhesive anchoring system

Sika® AnchorFix-2 adhesive anchor system is solvent/styrene free, epoxy acrylate based, and has been specifically formulated as a high performance, two component adhesive anchor system for threaded bars in uncracked concrete.

• Fast curing
• Standard guns can be used
• High load capacity

High Performance, two component adhesive anchor system for transport applications.

•    Fixing close to free edges

•    Versatile range of embedment depths

•    Anchoring without expansion forces

•    Component volume ratio of 1:1

•    Extended working time

High performance, 2 component adhesive anchor system use in cracked & uncracked concrete

•    Fixing close to free edges

•    Versatile range of embedment depths

•    Anchoring without expansion forces

High performance, professional anchoring adhesive

Sika AnchorFix®-2020 is a proprietary, two-component, thixotropic, fast curing, anchoring adhesive for anchoring threaded rods and reinforcing bars in both uncracked and cracked concrete. For use in cold to moderate climate conditions.

• Fast curing - cures down to 14 °F (-10 °C) when material is preconditioned to 41 °F (5 °C).
• Standard, high quality caulk guns can be used
• High load capacity